耀彩网

欢迎光临济南市天桥区昌达卷帘门加工部网站!

联系我们 收藏本站 在线留言

新闻资讯

首页>>新闻资讯铝合金卷帘门的故障怎样修补
新闻资讯
联系我们
济南市天桥区昌达卷帘门加工部

联系人:刘经理

电话:15953131568

网址:http://zbfuguang.com

地址:济南市天桥区金牛建材市场

铝合金卷帘门的故障怎样修补

来源:http://zbfuguang.com 日期:2022-10-20 发布人:
铝合金卷帘门在使用的时间到了一定时候也难免会出现这样那样的问题,但故障来了我们就是及时进行修补,下面济南卷帘门厂为您讲讲这方面的内容。
After a certain period of time, aluminum alloy roller shutter doors will inevitably have problems of one kind or another, but when the fault comes, we will repair it in time. Now Jinan roller shutter door factory will tell you about this.
1、卷帘门安装方位的上端应有牢靠的防火设备,在卷帘门的卷筒下端做包箱或吊顶时有必要设置可拆式活动盖板,在卷帘门弹下端有必要预留500×500mm可拆检修孔,以便于修补养护。
1. The upper end of the installation direction of the roller shutter door shall be equipped with reliable fire protection equipment. When the lower end of the roller of the roller of the roller shutter door is used as a box or ceiling, it is necessary to set a removable movable cover plate, and it is necessary to reserve 500 at the lower end of the roller shutter door × 500mm removable manhole for repair and maintenance.
2、卷帘门运转时如有发作较大抖动或异常声响时应停机检查,排除有碍门帘正常启闭的杂物。
2. In case of large shaking or abnormal noise during the operation of the roller shutter, stop the machine for inspection, and remove the sundries that may hinder the normal opening and closing of the shutter.
3、卷帘门门帘和易锈部位,应进行定时防腐、油漆及养护处置,制止用重物、硬物冲击门面
3. The curtain and rusty parts of rolling shutter door shall be treated with anti-corrosion, painting and curing at regular intervals to prevent heavy and hard objects from impacting the door surface
4、铝合金卷帘门底梁座上限方位有必要与轴承架下端坚持大于200mm的间隔,以确保制动中止时不发作冲顶表象。
4. It is necessary to adhere to an interval of more than 200mm between the upper limit of the bottom beam seat of the aluminum alloy roller shutter door and the lower end of the bearing frame, so as to ensure that there is no appearance of jacking when braking stops.
济南卷帘门厂
5、卷帘门在启闭中止过程中,应具有随位中止之功用,不该有中止而持续下滑表象,如发作下滑间隔大于50mm的状况出现,应立即对卷帘门操控电器和卷门机制动器进行仔细检查修补,运转正常停止。
5. During the suspension of opening and closing, the roller shutter door shall have the function of stopping with the position, and shall not have the appearance of continuous sliding due to suspension. If the sliding interval is greater than 50mm, the operating electric appliance of the roller shutter door and the roller shutter mechanism shall be carefully checked and repaired immediately, and the operation shall stop normally.
6、卷门机在运转、滑行、传动等部位应定时检查(少每年3次),并根据需要及时加油,以确保卷帘门的正常运用。
6. The operation, sliding, transmission and other parts of the rolling door machine shall be checked regularly (at least three times a year), and oil shall be added in time as required to ensure the normal operation of the rolling door.
要注意,卷帘门操作时,操作者有必要站在能看到卷门运转状况的方位进行操作,不然易发作意外而受损。关注我们http://zbfuguang.com,带你了解卷帘门更多事项!
It should be noted that during the operation of the roller shutter, it is necessary for the operator to stand at the position where he can see the operation of the roller shutter, otherwise it is easy to be damaged by accident. Follow us http://zbfuguang.com , let you know more about rolling shutter doors!

阅读/ Recommended reading

快速卷帘门是由电机转动带动门帘上下移动达到开门关门的,而电机是由独立的控制系统来控制的,门的开门高度,关门高度已经开关门的速度都是可以根据需求设置的,快速卷帘门也是属于自动化设备中...

卷闸门在安装时要注意什么? 2024-02-27
自动门水晶卷帘门安装方法介绍 2024-02-23
电动卷帘门常见的故障及维修方法 2024-02-21
电动卷帘门的快速保养与维护 2024-02-10

耀彩网【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

  • 宏顺卷帘门